Restore and Protect Your Glass from Costly Damage
Glass surfaces are vulnerable to scratches caused by construction tools, cleaning mishaps, environmental wear, and even vandalism. Our expert restoration service removes fine and deep scratches and protects your surfaces from future damage with the proven power of Diamon-Fusion® nanocoating.
Common Causes of Glass Scratching
1. Construction and Renovation Damage
During new builds or remodels, windows are often scratched by razor blades or sharp tools. Tempered glass is especially vulnerable due to microscopic particles from the tempering process that fuse to the surface. When disturbed by scrapers, these particles can leave behind fine scratches.
2. Sliding Glass Door Friction
Large glass doors sometimes bow slightly, causing metal hardware to rub across adjacent stationary panels. This can lead to deep, etched scratches—and even fracture the surface. We restore the damage and apply Diamon-Fusion® to minimize friction and prevent recurrence.
Hover or Tap to see the before.
3. Acid-Etching Graffiti
Acid-based vandalism mixed with paint or polish causes permanent etching, often accompanied by scratches. Our team removes this damage and applies Diamon-Fusion® to resist future tagging. The coating makes it harder for graffiti chemicals to bond with the surface, deterring repeat incidents.
Hover or Tap to see the before.
4. High-Value Glass in Luxury Homes
Expensive glass installations, especially in custom-built homes, are often too costly or complex to replace. These windows are frequently tempered and easily scratched. Our restoration method allows homeowners to avoid full replacement while preserving their investment.
The Diamon-Fusion® Difference: Scratch Resistance Reinvented
After polishing and restoring damaged areas, we apply the Diamon-Fusion® protective coating, which transforms the surface on a molecular level. The result: smoother glass, dramatically reduced friction, and much greater resistance to scratching.
| Material | Coefficient of Friction (Wet) | Load to Cause Damage (lbs) |
|---|---|---|
| Untreated Glass | 0.82 | 0.37 |
| Treated with Diamon-Fusion® | 0.13 | 4.00 |
Conclusion: Treated glass requires over 11 times more force to scratch or crack than untreated glass.
In other words, debris must be 10x heavier to cause the same damage on Diamon-Fusion®-treated glass.
Protect Your Glass—Before It’s Too Late
Whether you’re restoring scratched windows, removing graffiti, or protecting high-end architectural glass, we help you avoid costly replacements and long-term damage.
Contact us today for a free consultation and discover how Diamon-Fusion® can protect your property from future wear and tear.